Implementing Cisco IP Routing (ROUTE)


Implementing Cisco® IP Routing (ROUTE) Version 2.0 is a Cisco Training on Demand course. It prepares you to configure and optimize a routing domain using Open Shortest Path First (OSPF) Protocol, Enhanced Interior Gateway Routing Protocol EIGRP, Border Gateway Protocol (BGP), Policy Based Routing (PBR), IP service level agreement (SLA), and configure redistribution when needed. The course covers routing for both IPv4 and IPv6, and teaches how to explain routing protocols, networking technologies, and remote connectivity options. The course also explores routing protocols, such as RIP, EIGRP, and OSPF, which all have a particular role or function in a network. 

In addition, the course teaches how to translate from private to public address spaces using NAT and PAT, configure multihomed connections, and how to implement BGP for IP version 4 and version 6, which is helpful because BGP is the de facto standard used for Internet routing today. To protect the routing protocol from becoming a vector of attack, the course also teaches how to secure communication between routers to ensure the integrity of the advertised network paths. 


The knowledge and skills recommended before attending this course are: 

● Describing network fundamentals 

● Establishing Internet and WAN connectivity (IPv4 and IPv6) 

● Managing network device security 

● Operating a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree 

● Troubleshooting IP connectivity (IPv4 and IPv6) 

● Configuring and troubleshooting EIGRP and OSPF (IPv4 and IPv6) 

● Configuring devices for Simple Network Management Protocol (SNMP), Syslog, and NetFlow access 

● Managing Cisco device configurations, Cisco IOS® images, and licenses 

Kurs Süresi

  • Instructor-led training: 5 days with hands-on lab practice
  • Virtual instructor-led training: 5 days of web-based classes with hands-on lab practice

Kurs Hedefleri

After completing this course, you should be able to: 

● Describe routing protocols, different remote connectivity options, and their impact on routing, and implement Routing Information Protocol Next Generation (RIPng) 

● Configure EIGRP in an IPv4 and IPv6 environment 

● Configure OSPF in an IPv4 and IPv6 environment 

● Implement route redistribution using filtering mechanisms 

● Implement path control using policy based routing and IP SLA 

● Implement enterprise Internet connectivity 

● Secure Cisco routers according to best practices and configure authentication for routing protocols 

Ders İçeriği

Section 1: Describing Routing Protocols 

● Section 2: Implementing RIPng 

●Section 3: Implementing EIGRP 

● Section 4: Configure EIGRP for IPv6 

● Section 5: Discovering Named EIGRP Configuration 

● Section 6: Establishing OSPF 

● Section 7: Optimizing OSPF Behavior 

● Section 8: Configuring OSPFv3 

● Section 9: Configuring Redistribution 

● Section 10: Implementing Path Control 

● Section 11: Establishing Internet Connectivity © 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

● Section 12: Implementing BGP 

● Section 13: Implementing BGP for IPv6 

● Section 14: Securing Cisco Routers 

● Section 15: Configuring EIGRP Authentication 

● Section 16: Configuring OSPF and BGP Authentication

Lab İçeriği

The labs included in this course are: 

● Discovery Lab 2.3: Configuring RIPng 

● Challenge Lab 2.5: Configure RIPng 

● Discovery Lab 3.5: Configuring and Investigating Basic EIGRP 

● Discovery Lab 3.10: Building the EIGRP Topology Table 

● Discovery Lab 3.19: EIGRP Stub Routing 

● Discovery Lab 3.22: EIGRP Summarization 

● Discovery Lab 3.24: EIGRP Load Balancing 

● Challenge Lab 3.25: Configure EIGRP 

● Discovery Lab 4.3: EIGRP for IPv6 Configuration 

● Challenge Lab 4.5: Configure and Optimize EIGRP for IPv6 

● Discovery Lab 5.3: Discovering the Named EIGRP Configuration 

● Challenge Lab 5.6: Implement EIGRP for IPv4 and IPv6 through Named Configuration 

● Discovery Lab 6.7: Basic OSPF Configuration Introduction 

● Discovery Lab 6.15: Building the Link-State Database 

● Discovery Lab 6.20:OSPF Path Selection 

● Challenge Lab 6.24: Configure OSPF 

● Discovery Lab 7.4: OSPF Route Summarization © 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

● Discovery Lab 7.8: OSPF Stub Areas 

● Challenge Lab 7.12: Optimize OSPF 

● Discovery Lab 8.2: Implementing OSPFv3 

● Challenge Lab 8.5: Configure OSPFv3

● Discovery Lab 9.6: Basic Redistribution 

● Discovery Lab 9.15: Manipulate Redistribution 

● Discovery Lab 9.21: Manipulate Redistribution Using Route Maps 

● Challenge Lab 9.25: Implement Redistribution Using Route Filtering 

● Discovery Lab 10.6: Analyzing Cisco Express Forwarding 

● Discovery Lab 10.11: Implementing PBR 

● Challenge Lab10.16: Implement Path Control 

● Discovery Lab11.16: Configuring NAT Virtual Interface 

● Discovery Lab 11.18: Basic IPv6 Internet Connectivity 

● Discovery Lab 12.14: Basic BGP Configuration 

● Discovery Lab 12.20: Influencing BGP Path Selection 

● Challenge Lab 12.33: Configuring BGP 

● Discovery Lab 13.5: BGP for IPv6 

● Discovery Lab 15.3: Configuring EIGRP Authentication 

● Challenge Lab 15.7: Configure Authentication for EIGRP Routes 

● Discovery Lab 16.3: OSPF Authentication Configuration 

● Challenge Lab 16.9: Configuring BGP Authentication

Kimler Katılmalı

This course is designed for network engineers and technicians, support engineers, system engineers, network analysts, senior network administrators, and those preparing for the 300-101 ROUTE exam


Randevu ve bilgi talebi için : 0850 755 02 83